manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 178 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 178

Features of your vehicle

94

4

The rearview camera display will
activate when the back-up light is ON
with the ignition switch ON and the
shift lever in the R  (Reverse) posi-
tion.
This system is a supplemental sys-
tem that shows behind the vehicle
through the rearview display mirror
while backing-up.

The rearview camera is not a substi-
tute for proper and safe backing-up
procedures. Always drive safely and
use caution when backing up. The
rearview camera may not display
every object behind the vehicle.

❈

If your vehicle is equipped with
AVN(Audio, Video and Navigation)
system, rearview display will show
behind the vehicle through the
AVN monitor while backing-up.
Refer to a separately supplied
manual for detailed information.

REARVIEW CAMERA DISPLAY

OVG043107

OVG043106L

WARNING 

- Backing Up &

Using Camera

Never rely solely on the rear
view camera display when
backing up. Prior to entering
your vehicle always do a visual
check of the area behind your
vehicle, and before backing up
be aware of your surroundings
and supplement the rear view
camera by looking over your
shoulders and checking your
rear view mirrors. Due to the dif-
ficulty of ensuring that the area
behind you remains clear,
always back up slowly and stop
immediately if you even suspect
that a person, and especially a
child, might be behind you.

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments