Kia 2015 Cadenza Owner'S Manual Download Page 155

Page: 155 / 429

4 71

Features of your vehicle

Trunk Open

• It means that the trunk is open.

Sunroof Open (if equipped)

• The warning message illuminates

if you turn off the engine and then
open the driver's door when the
sunroof is open.

Align steering wheel

• This warning message illuminates

if you start the engine when the
steering wheel is turned to more
than 90 degrees to the left or right.

• It means that you should turn the

steering wheel and make the angle
of the steering wheel be less than
30 degrees.

OVG043336E

■

Type A

■

Type B

OVG043335E

OVG043338E

■

Type A

■

Type B

OVG043337E

OVG043340E

■

Type A

■

Type B

OVG043339E

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Cadenza

Reviews:

Kia 2015 Cadenza, Owner'S Manual, Page: 155 / 429

Search results

Summary of Contents for 2015 Cadenza

Reviews: