manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 140 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 140

Features of your vehicle

56

4

✽

✽

NOTICE

• The fuel tank capacity is given in

chapter 8.

• The fuel gauge is supplemented by

a low fuel warning light, which
will illuminate when the fuel tank
is nearly empty.

• On inclines or curves, the fuel

gauge pointer may fluctuate or the
low fuel warning light may come
on earlier than usual due to the
movement of fuel in the tank.

✽

✽

NOTICE

Fuel display may not be accurate if
you are filling in sloping places.

WARNING - 

Fuel Gauge

Running out of fuel can expose
vehicle occupants to danger.
You must stop and obtain addi-
tional fuel as soon as possible
after the warning light comes
on or when the gauge indicator
comes close to the “E (Empty)”
level.

CAUTION

Avoid driving with a extremely
low fuel level. Running out of
fuel could cause the engine to
misfire damaging the catalytic
converter.

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments