manualshive.com logo in svg

Kia 2015 Cadenza, Owner'S Manual, Page: 123 / 429

Share
Download
Kia 2015 Cadenza Owner'S Manual Download Page 123

4 39

Features of your vehicle

Heated steering wheel 
(if equipped)

With the ignition switch in the ON
position, pressing the heated steer-
ing wheel button warms the steering
wheel. The indicator on the button
will illuminate and  notify you on the
LCD display.
To turn the heated steering wheel off,
press the button once again. The
indicator on the button will turn off
and notify you on the LCD display.

Horn

To sound the horn, press the horn
symbol on your steering wheel.
Check the horn regularly to be sure it
operates properly.
To sound the horn, press the area
indicated by the horn symbol on your
steering wheel (see illustration). The
horn will operate only when this area
is pressed.

CAUTION

Do not install any grip to oper-
ate the steering wheel. This
causes damage to the heated
steering wheel system.

OVG043200N

OXM043305

Summary of Contents for 2015 Cadenza














































































































































































































































































































































































































































Reviews:

No comments