manualshive.com logo in svg

Kia 2009 H-1, Owner'S Manual, Page: 34 / 336

Share
Download
Kia 2009 H-1 Owner'S Manual Download Page 34

Safety features of your vehicle

20

3

C020105APA

Stowing the rear seat belt 
(if equipped)

• The rear seat belt buckles can be

stowed in the pocket between the rear
seatback and cushion when not in use.

• The center seat belt can be stowed

with the plate and webbing rolled in the
pocket between the rear seatback and
cushion.

C020200APA

Pre-tensioner seat belt 
(if equipped)

Your vehicle is equipped with driver's and
front passenger's pre-tensioner seat
belts. The purpose of the pre-tensioner is
to make sure that the seat belts fit tightly
against the occupant's body in certain
frontal collisions. The pre-tensioner seat
belts may be activated in crashes where
the frontal collision is severe enough.

When the vehicle stops suddenly, or if
the occupant tries to lean forward too
quickly, the seat belt retractor will lock
into position. In certain frontal collisions,
the pre-tensioner will activate and pull
the seat belt into tighter contact against
the occupant's body.
If the system senses excessive seat belt
tension on the driver or passenger's seat
belt when the pre-tensioner activates, the
load limiter inside the pre-tensioner will
release some of the pressure on the
affected seat belt (if equipped).

OED030300

Lap belt type

Lap/shoulder belt type

OSA037045

OSA037043

OSA037044

• Type A

• Type B

Summary of Contents for 2009 H-1

















































































































































































































































































































































Reviews:

No comments