manualshive.com logo in svg

Kia 2009 H-1, Owner'S Manual, Page: 33 / 336

Share
Download
Kia 2009 H-1 Owner'S Manual Download Page 33

3 19

Safety features of your vehicle

With a 2-point static type seat belt, the
length must be adjusted manually so it
fits snugly around your body. Fasten the
belt and pull on the loose end to tighten.
The belt should be placed as low as pos-
sible on your hips, not on your waist. If
the belt is too high, it could increase the
possibility of injury in an accident.

When using the rear center seat belt, the
buckle with the “CENTER” mark must be
used (if equipped).

To release the seat belt:

When you want to release the seat belt,
press the button (1) of the buckle.

WARNING

The center lap belt latching mecha-
nism is different from those for the
rear seat shoulder belts. When fas-
tening the rear seat shoulder belts
or the center lap belt, make sure
they are inserted into the correct
buckles to obtain maximum protec-
tion from the seat belt system and
assure proper operation.

OEN036030

B220B01NF

Too high

Shorten

Correct

OSA037042

B210A02NF-1

Summary of Contents for 2009 H-1

















































































































































































































































































































































Reviews:

No comments