manualshive.com logo in svg

Kia 2009 H-1, Owner'S Manual, Page: 240 / 336

Share
Download
Kia 2009 H-1 Owner'S Manual Download Page 240

6 15

What to do in an emergency

IF YOU HAVE A FLAT TIRE (WITH TIREMOBILITYKIT, IF EQUIPPED)

F120000AUN

Please read the instructions before
using the TireMobilityKit.
(1) TireMobilityKit
(2) Sealant bottle

F120100AUN

Introduction

With the TireMobilityKit you will stay
mobile even after experiencing a tire
puncture. The system of the com-
pressor and sealing compound effec-
tively and comfortably seals most
punctures in a passenger car tire
caused by nails or similar objects
and reinflates the tire. After you are
ensured that the tire is properly
sealed you can drive cautiously on
the tire (up to 200 km / 120 miles) at
a max. speed of 80 km/h / 50 mph in
order to reach a vehicle or tire dealer
to have the tire replaced.
It is possible that some tires, espe-
cially with larger punctures or dam-
age to the sidewall, cannot be sealed
completely. Air pressure loss in the
tire may adversely effect tire per-
formance. For this reason, you
should avoid abrupt steering or other
driving maneuvers, especially if the
vehicle is heavily loaded or if a trailer
is in use. The TireMobilityKit is not
designed or intended as a perma-
nent tire repair method and is to be
used for only one tire.

This instruction shows you step by
step how to temporarily seal the
puncture simply and reliably. Read
the section "Notes on the safe use of
the TireMobilityKit".

WARNING

Do not use the TireMobilityKit if
a tire is severely damaged by
driving on a flat tire or with
insufficient air pressure. Only
punctured areas located within
the tread region of the tire can
be sealed using the
TireMobilityKit. Damage to the
sidewall must not be repaired
due to safety reasons.

OSA067026

OSA067027

Summary of Contents for 2009 H-1

















































































































































































































































































































































Reviews:

No comments