manualshive.com logo in svg

Kia 2009 H-1, Owner'S Manual, Page: 122 / 336

Share
Download
Kia 2009 H-1 Owner'S Manual Download Page 122

4 51

Features of your vehicle

D220000AUN

✽

✽

NOTICE

If you want to defrost and defog the
front windshield, refer to “Windshield
defrosting and defogging” in this sec-
tion.  

D220101AUN

Outside mirror defroster 
(if equipped)

If your vehicle is equipped with outside
mirror defrosters, they will operate at the
same time when you turn on the rear
window defroster.

D220100ASA

Rear window defroster

The defroster heats the window to
remove frost, fog and thin ice from the
rear window, while the engine is running.
To activate the rear window defroster,
press the rear window defroster button.
The indicator on the rear window
defroster button illuminates when the
defroster is ON.
If there is heavy accumulation of snow on
the rear window, brush it off before oper-
ating the rear defroster.
To turn off the defroster, press the rear
window defroster button again.

CAUTION

To prevent damage to the conduc-
tors bonded to the inside surface of
the rear window, never use sharp
instruments or window cleaners
containing abrasives to clean the
window.

OSA047089

DEFROSTER

Summary of Contents for 2009 H-1

















































































































































































































































































































































Reviews:

No comments