manualshive.com logo in svg

Kia 2009 H-1, Owner'S Manual, Page: 106 / 336

Share
Download
Kia 2009 H-1 Owner'S Manual Download Page 106

4 35

Features of your vehicle

D150313AUN

Charging system warning
light

This warning light indicates a malfunction
of either the generator or electrical
charging system.
If the warning light comes on while the
vehicle is in motion:
1. Drive to the nearest safe location.
2. With the engine off, check the genera-

tor drive belt for looseness or break-
age.

3. If the belt is adjusted properly, a prob-

lem exists somewhere in the electrical
charging system. Have an authorized
KIA dealer correct the problem as
soon as possible.

D150315AUN

Tailgate open warning light

This warning light illuminates when the
tailgate is not closed securely with the
ignition switch in any position.

D150316AUN

Door ajar warning light

This warning light illuminates when a
door is not closed securely with the igni-
tion switch in any position.

D150317ASA

Immobilizer indicator 
(if equipped)

This light illuminates when the immobiliz-
er key is inserted and turned to the ON
position to start the engine.
At this time, you can start the engine. The
light will go out after the engine starts
running.
If this light blinks when the ignition switch
is in the ON position before starting the
engine, have the system checked by an
authorized KIA dealer.

D150318AUN

Low fuel level warning light

This warning light indicates the fuel tank
is nearly empty. When it comes on, you
should add fuel as soon as possible.
Driving with the fuel level warning light on
or with the fuel level below “E” can cause
the engine to misfire and damage the
catalytic converter.

Summary of Contents for 2009 H-1

















































































































































































































































































































































Reviews:

No comments