manualshive.com logo in svg

Kia 2009 H-1, Owner'S Manual, Page: 105 / 336

Share
Download
Kia 2009 H-1 Owner'S Manual Download Page 105

Features of your vehicle

34

4

D150308ASA

Parking brake & brake fluid
warning light

Parking brake warning 

This light is illuminated when the parking
brake is applied with the ignition switch in
the START or ON position. The warning
light should go off when the parking
brake is released.

Low brake fluid level warning

If the warning light remains on, it may
indicate that the brake fluid level in the
reservoir is low.
If the warning light remains on:
1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the engine stopped, check the

brake fluid level immediately and add
fluid as required. Then check all brake
components for fluid leaks.

3. Do not drive the vehicle if leaks are

found, the warning light remains on or
the brakes do not operate properly.
Have the vehicle towed to any author-
ized KIA dealer for a brake system
inspection and necessary repairs.

To check bulb operation, check whether
the parking brake and brake fluid warning
light illuminates when the ignition switch
is in the ON position.

Low brake vacuum pressure warning 
(diesel engine only)

If the warning light remains on, it may
indicate that the brake vacuum pump has
a problem. Therefore you should avoid
high speed driving or sudden stop, and
you should depress the brake pedal
deeper and harder than usual when
braking. Make sure you have the brake
system checked and repaired by an
authorized KIA dealer.

WARNING 

Driving the vehicle with a warning
light on is dangerous. If the brake
warning light remains on, have the
brakes checked and repaired imme-
diately by an authorized KIA dealer.

WARNING

• Continuous braking while driving

on steep or long downhill may
cause to descend the vacuum
level in brake booster for a time
and turn on the warning light. In
this case,

shift down the

transaxle. If the warning light illu-
minate continuously, stop the
vehicle in the safe location and
wait until the warning light goes
off.

• Driving the vehicle with a warn-

ing light on is dangerous. If the
brake warning light remains on,
have the brakes checked and
repaired immediately by an
authorized KIA dealer.

Summary of Contents for 2009 H-1

















































































































































































































































































































































Reviews:

No comments