manualshive.com logo in svg

Kia 2007 Amanti, Owner'S Manual, Page: 271 / 283

Share
Download
Kia 2007 Amanti Owner'S Manual Download Page 271

Maintenance

36

7

LUBRICANT SPECIFICATIONS 

Recommended lubricants  

To help achieve proper engine and pow-
ertrain performance and durability, use
only lubricants of the proper quality. The
correct lubricants also help promote
engine efficiency that results in improved
fuel economy.
Engine oils labeled Energy Conserving
Oil are now available. Along with other
additional benefits, they contribute to fuel
economy by reducing the amount of fuel
necessary to overcome engine friction.
Often, these improvements are difficult to
measure in everyday driving, but in a
year’s time, they can offer significant cost
and energy savings.

*¹ Refer to the recommended SAE viscosity numbers on the next page.

These lubricants and fluids are recommended for use in your vehicle.

Lubricant

Classification

Engine oil *¹

API Service SL or above, ILSAC GF-3 or above

Automatic transaxle fluid

DIAMOND ATF SP-III 

Power steering fluid

PSF-IV

Brake fluid

FMVSS116 DOT-3 or DOT-4

Summary of Contents for 2007 Amanti




























































































































































































































































































Reviews:

No comments