background image

Assembly Instructions

Design Collection

  

Itoki Table 

March 2013

Assemble units as described herein only. To do otherwise 
may result in instability. All screws, nuts and bolts must be  
tightened securely and must be checked periodically after  
assembly. Failure to assemble properly, or to secure parts 
may result in assembly failure and personal injury.

Leg

connector

castings (Qty. 4)

Table leg

(Qty. 4)

Worksurface

(Qty. 1)

Leveling

glide (Qty 4)

Leg

mounting

plate (Qty 4)

Table Leg

cross brace

(Qty 4)

M8 x 25mm Flat Hd.

cap screw w/patch (Qty. 4)

1/4-20 x 1” Flat Hd.

cap screw w/patch (Qty. 8)

M8 x 35mm Button Hd.

cap screw w/patch (Qty. 4)

M8 x 16mm Button Hd.

cap screw w/patch (Qty. 8)

M6 x 20mm Socket Hd.

cap screw w/patch (Qty. 4)

Recommended tools

•  Safety Glasses

•  Level

•  English and Metric Hex Head 

wrenches

•  Electric Screwdriver

•  Phillips head drive bits (#2)

•  Masking tape or similar

Overview

This installation manual is organized 

in the recommended installation order.

42 x 42 Table

1. Unpack the worksurface and lay it 

face down on a smooth protective 

surface (carpet). Unpack the leg 

and mounting plate sets.  Identify 

all of the parts.

2. Unwrap the hardware pack and 

identify all of the parts.

Summary of Contents for Design Itoki DD









Reviews: