KHS e.K.
Delle 25-27
45468 Muelheim / Ruhr
Germany
www.khs.net | [email protected]
User‘s Manual | Warranty
KHS INCEPTOR DIGITAL
Page 1
Congratulations
We would like to congratulate you on having purchased this KHS Inceptor Digital, which is a
high-quality sports- and outdoor-watch. This Inceptor Digital watch off ers you high-calibre
precision with highest-quality materials and components as well as a ruggedness against
shocks, variations in temperatures, water and dust.
The KHS Inceptor Digital performs the following functions:
• digital time indication home time (with weekday and date)
• chronograph / stopp watch functions (ST) with split timer (SP) up to 1/100 second
• 12 or 24 hour indication
• alarm and chime (AL), daily and hourly
• background illumination
To ensure that your KHS Inceptor Digital operates with perfect precision for many years to come,
we advise you to pay very careful attention to the information provided in this user manual.
Please read the instructions pertaining specifi cally to your KHS Inceptor on the following pages.
Buttons and Display Modes
Buttons:
S1 – „Start/Stop“
S2 – „Split | Reset“
S3 – „Mode | Adjust“
S4 – „Light“
The watch has 4 display modes:
home time,
chronograph / stop watch (ST),
alarm / chime (AL) and
the setting display mode.
Push button S3 once to change from one display mode to another. In any setting mode, if there is
no key manipulation for approximately 1-2 minutes, the watch will automatically save the entered
data and exit the setting mode.
Home time display
Your KHS Inceptor Digital shows your set home time in the standard fi rst display mode. The time
indication can be changed from a 12 hour to a 24 hour indication. The button S4 activates the
background illumination for 3 seconds in every display mode.
To set the time and calendar
Push button S3 (MODE | ADJUST) until the setting mode is displayed (the seconds digits blink). The
button S1 (START | STOP) resets the seconds indication back to „00“. You can now toggle between
the diff erent indication elements by pressing S2 (SPLIT | RESET) repeatedly to choose the digits you
want to adjust (the active element blinks).
The display elements are selected in the following order:
Hour -> Minute -> Month -> Day -> Weekday - > Second.
You can now adjust the selected display element by pressing S1 until set correctly.
To set time and calendar | Continuation
To toggle between the 12 hour and 24 hour indication mode, while in setting mode, select the hour
display element and press S1 repeatedly, until the indication shows „H“ (24h indication),
„P“ (12h indication) or „A“ (12h indication). Now set the correct time.
Note:
Pressing the button S1 while „seconds“ are selected in setting mode will reset the seconds digits to
„00“ if the current second indication ranges between „00“ and „29“.
If the second indication ranges between „30“ and „59“, pushing S1 will reset the seconds to „00“ and
add „1“ to the minutes indication.
Note:
Weekdays are not automatically set matching the set date. Please be careful to set the correct
weekday corresponding to the set date separately.
To exit the setting mode, press the button S3 (MODE | ADJUST).
Chronograph | Stop watch
Using S3 (MODE | ADJUST), select the chronograph / stop watch mode. Start counting by pushing
S1 (START | STOP). Pushing S1 again stops the current counting. The button S2 (SPLIT | RESET) resets
the chronograph to zero.
To split a running counting, press S2 (SPLIT | RESET). „SP“ will be indicated in the upper display area.
By pressing S2 again, counting will be resumed. S1 stops the counting. To show the total counting
time, stop the current counting by pressing S1 (START | STOP), followed by pressing S2.
Pressing S2 a second time will reset the total time to zero.
Note:
While the chronograph is running, push S3 to go back to home time indication. The current
chronograph counting will continue in the background. Use S3 to change back to the chronograph
mode at any time and split, stop, start over or show the total time, as regular.
Alarm | Chime
Press button S3 (MODE | ADJUST) until the alarm/chime setting mode is displayed.
By pressing S1 (START | STOP) repeatedly, the alarm and the hourly chime will be selected
consecutively. In the lower display area, the symbols for the alarm ( ) and/or the hourly
chime ( ) will be displayed.
By pressing S1 repeatedly, the alarm and chime will be consecutively deactivated and re-
activated. Currently active functions are indicated by the displayed symbols.
To set a daily alarm, while in alarm/chime setting mode, push button S2 („hour“ blinks). Set the
desired hour for your alarm by pressing S1 until set correctly. Press S2 to confi rm and toggle to
setting the minutes („minute“ blinks). Set the desired minutes using button S1 accordingly.
Exit the alarm setting mode by pressing S3 (MODE | ADJUST).
Note:
The indication of the alarm time is displayed according to the currently set format of
hour indication (12h or 24h indication).
