manualshive.com logo in svg

Kguard MR-4020, User Manual, Page: 63 / 78

Share
Download
Kguard MR-4020 User Manual Download Page 63

ENGLISH

Mars Series: Operating the NVR

NVR User’s Manual

63

The Users menu allows you to view, change the password, authorize user and set the access rights in using the 
NVR. There is one administrator account and 6 user accounts. By default, the administrator account’s user name is 
“admin” and the password is 123456. We suggest you change the password, to protect your privacy. For your privacy 
protection, please do NOT leave the “admin” password blank!

NOTE

: Only the administrator account is enabled by default.

•  SEL

: Check this checkbox to customize the user account and click 

Edit

. When the modifications are done, click 

Apply

. 

System: Info

QR Code

In this menu you can review all the technical information concerning your NVR. 

NOTE

: If you need to scan the QR code of the NVR but the sticker with the code on top of the device has got damaged 

or is not in the reach, then here you can find the device’s QR code here.

Summary of Contents for MR-4020















































































Reviews:

No comments