ENGLISH
Mars Series: Operating the NVR
52
NVR User’s Manual
Network: Email
•
SSL:
Enable if your e-mail server requires the SSL verification. If you are not sure, please consult your e-mail
service provider. For example, if you are using Gmail then this option should be enabled.
• SMTP Port:
Enter the SMTP port of your e-mail server. For example, if you are using Gmail, the SMTP port is 465.
• SMTP Server
: Enter the SMTP server address of your e-mail.
• Sender Email
: Enter your e-mail address.
• Sender Password
: Enter the password of your e-mail.
• Receiver Emai
l: Enter the e-mail address where you want to receive the event notifications from the NVR.
• Interva
l: Configure the length of the time interval between the notification e-mails from NVR. Please be
noted that if you set the interval, for example 1 minute, have not configured the e-mail event
Schedule
, and
your mailbox has a size limit, then your mailbox may become full very fast. In this case you may miss the new
notifications from the NVR.
•
: You need to enable the e-mail function, to allow the NVR to send you notification e-mails when an event
occurs. For your convenience, you can define a schedule when and what type of events you want to be notified.
To set up a schedule, click
Schedule
.
Slot for Motion
Slot for Exception
Slot for Alarm
Email Schedule
By default all event types are marked for a single channel on a chosen day and time. Click on the time slot of the
event to exclude sending an e-mail of that event when the event is triggered. Use the
Copy
function to copy the
configured settings to another channel and/or day. Click
Exit
to return to
settings menu
When you have finished configuring the e-mail settings, click
Email Test
and check your Inbox if the test e-mail has
arrived.