ENGLISH
Mars Series: Quick Setup Guide
NVR User’s Manual
15
Network Configuration
Network settings should be configured if you want to connect to the NVR remotely for live viewing or for example,
if you want the NVR to synchronize the date and time automatically. For the initial setup of the NVR you can skip
configuring the network settings and do it later via the Main Menu.
Type
: Select the network type you are using. The most common types are
DHCP
or
Static
. Most probably your network
type is
DHCP
, unless the network is
manually
addressed (usually called-
Static
).
NOTE:
If your network type is
Static
, ask your ISP for assistance on determining the IP address, Subnet mask, Gateway,
and DNS 1/2 server. If your network type is DHCP, your NVR will optain the connection parameters, like IP address,
Subnet Mask, Gateway and DNS 1/(2) automatically.
Client Port
and
HTTP Port
: For time being, keep the default port values. These ports are important to configure if you
want to use
UPnP
feature or do
Port Forwarding
for allowing access to the NVR remotely from a PC via HTTP Interface.
For the first time startup, you do not need to configure
or
DDNS
.
Click
Apply.
A notification message appears on the screen, click
OK
.
Another notification messages appears on the screen, asking your confirmation to disable Startup Wizard after reboot.
Click
Yes
.
The NVR will reboot.