Home
/
KeyWest Technology
/
MXB-A
/
Manual

KeyWest Technology MXB-A, Manual, Page: 51 / 153

Share

Page: 51 / 153

KeyWest Technology MXB-A Manual Download Page 51

MediaXtreme MediaZone

Keywest Technology

14563 W. 96

th

Terrace

Lenexa, Kansas 66215

800.331.2019
www.keywesttechnology.com

51

23 Mar 2009

Change 06

ADDITIONAL FEATURES and FUNCTIONS

ADD VIDEO CLIP to PiP PAGE AFTER PAGE ADDED TO LAYER

As we already have covered, the MX is capable of playing back a video file in a PiP window
within a set. Remember a page must have a PiP window in order for a video clip to be attached
to it. If we have such a page and did not attach a clip to the page at the time we added it to a
layer, we can still do so after the fact.

Going through the tutorial, we added a PiP window to “Theme069.jpg”, and we did add a clip to
the page…but if we hadn’t….

As shown above, select the page to receive the MPEG,
and then select the Clip to be added from the file
browser.  Click ADD CLIP in the control section, or
right click and select ADD CLIP.

The Add Clip window will open.

This window will allow you to adjust the clip dwell,
which will change the dwell of the page.  The system
defaults to the actual length of the clip, but it is
available for change.  This form allows for a clip to be
added over multiple pages.  This might be an interesting
addition for you if you wish to play a 30 minute clip
and want to change the graphics and backgrounds, or
crawls and logos during the show.

«
...
49
50
51
52
53
...
»

Summary of Contents for MXB-A


























































































































































Reviews:

No comments