Avoid to place couch and carpet. It happens high hot and to burn carpet
easily when hearting hard in bottom.
WARNING:
Do not move when using or finishing. Hot Water leaks out cause scald.
Operation
Filling the Water Tank
Take the water tank from main body and open the screw plug counterclockwise.
Fill the water tank with clear, clean water and replace the screw plug firmly.
Turn the water tank back over and place it in the main body. Make sure that is
securely positioned.
Following order to clear when supplying every time:
Open water tank cap and fill (about 1/3) tap water.
Close water cap and shake clean inside, and dump water.
Add tap water.
WARNING:
Output Nozzle does not plug tap directly.
Do not add hot eater up 40
℃
.
Do not set water trough random. The air of water trough expands because
hot power of electric stove and shine shoot directly will cause to go to
temper, and water trough changes shape.
Setting the Controls
1.
Plug the appliance into power outlet. Turn on On/Off switch to run the
appliance. The power on led will illuminate.
2.
Hi: mist output is about 400cc/ hr, Lo: mist output is about 200cc/ hr
3.
Refill indicator light: will illuminate when tank is empty or removed.
4.
Atomizer stopping will do automatically, and output as no mist.
5.
Want to use continually with adding water.
6.
Cut power switch without using
CAUTION:
Once the tank is empty, the appliance will switch itself off
automatically via the water level sensor. Always switch the appliance off
before removing the tank.
WARNING:
DO NOT TOUCH or face near steam nozzle, because it
causes a scald.
How to Clean
IMPORTANT:
Clean your humidifier regularly (every 2 weeks or more as
needed) to help eliminate odors.
CAUTION:
Disconnect the power cord before cleaning the unit.
1. Turn OFF and unplug the humidifier.
2. Remove the water tank from the base.
3. Pour all water from the tank. DO NOT USE SOAP OR DETERGENTS AND
NEVER USE ABRASIVE CLEANERS.
4. Rinse the Water Tank thoroughly with clean water or with a mild bleach and
water solution.
5. Take brush stored in base and clean off mineral deposits and debris from
nebulizer and water sensor.
6. Wipe all surfaces of the base unit with a soft DRY or slightly dampened
cloth.
DO NOT IMMERSE THE BASE UNIT IN WATER, AN ELECTRIC SHOCK
MAY RESULT OR THE HUMIDIFIER MAY BE DAMAGED.
7. Prior to storage, make sure all components are completely dry.
Technical Specifications
Suitable for Rooms of
≒
100m
3
Power Consumption
?A or ?W
Weight
≒
Kg
Voltage
120V~60Hz
Water Content
≒
gal
Output
Max. ? g/h
Dimensions
L=?mm, W=?mm, H=?mm
Product Holder
Join-One Electric (Shenzhen) Co.,Ltd.
Subject to technical modification
P6-14606
P5-14606