SAVE THESE INSTRUCTIONS
Know Your Humidifier
Parts and Features
Before First Use
Be sure to remove all packing materials.
Choose a flat, level, water-resistant location for the humidifier that will allow for
good air circulation and that is not accessible to children.
Do not place the humidifier where it or its cord presents a tripping or stumbling
hazard, or where the air vents are blocked.
How to Assemble and Use
IMPORTANT:
Make sure that the water tray and filter are properly installed before filling the
tank and operating the humidifier.
DO NOT USE THE HUMIDIFIER WITHOUT THE FILTER IN PLACE!
Selecting the Proper Location
To prevent the risk of injury or damage to the humidifier and furnishings and
provide the best possible performance of your humidifier, follow the placement
guidelines below:
DO:
Place the humidifier on a flat, stable, waterproof surface.
Place the humidifier along an inside wall near an electrical outlet where it is
out of the way and it and its cord do not present a tripping hazard.
Select a location with adequate air circulation.
Leave at least six inches (15 cm) between the humidifier and any walls or
furnishings. Failure to do so could cause poor air circulation and mildew or
moisture damage to walls or furniture.
Unplug the humidifier and empty the water tank and tray if the humidifier is
to be moved, or will not be used for several days.
DO NOT:
Do not block the air intake and exhaust grilles. This will cause poor
performance and may cause moisture damage and mildew build-up.
Do not use in a small, enclosed space or in an area with a humidity level
above 50%. Excessive humidity could result.
Do not place on or near heat sources such as stoves, radiators, or heaters,
or in direct sunlight.
Never place the humidifier in a closed room. A closed room may result in
excessive humidity.
P2-14606
P3-14606