How to Operate
SPEED
STOP/ LOW - MID - HIGH
ON TIMER
Select TIMER ON (0 -0.5-1.0-1.5-2.0-2.5-3.0 Hour)
OFF TIMER
Select TIMER OFF
Ready
Insert the power plug into a 120V power point.
Start (speed setting)
Switch on by pushing
[LOW - MID - HIGH]
button.
Pushing
[STOP]
button to end the operation.
Timer setting
Turn timer on, select at your desired time (0 -0.5-1.0-1.5-2.0-2.5-3.0 Hour).
(After the time you set, the fan will stop automatically)
When the timer is set [
TIMER OFF
], will stop timer function.
Tilting Adjustment
Always switch the fan off before making a tilt adjustment. The air flow can be
adjusted upward or downward simply by moving the guard up or down.
CAUTION:
In the case of no blades installed, Please don't run the product.
Maintenance and Storage
WARNING
When cleaning, the plug must be removed from the power point. Do not
handle plug with wet hands.
[May cause electric shock or injury.]
Do not press the height adjustment button while the fan and fan guard are
detached.
[The motor section (slide pipe) may jump out of the stand part, causing injury.]
When disassembling the base or stand, unplug plug from the power point.
[May cause electric shock or injury.]
How to Clean
Disassemble the fan and guard in the inverse order of assembling. Wash off dirt
and dust with well squeezed wet soft cloth with water or neutral detergent, then
wipe off the detergent.
CAUTION:
Do not use volatile solvents such as gasoline, thinner, benzene, wax,
kerosene, alcohol, polishing powder, or alkaline detergent. These may
discolour or damage the machine, causing injury.
If using a chemical dust cloth, follow those instruction.
Do not oil plastic parts. May cause discoloration or injury from damaged parts.
How to Store
Disassemble fan, guard, stand and base in the inverse order of assembling.
Clean the motor shaft and oil put the motor shaft cover back to the motor shaft.
Store these parts in the box provided at purchase and keep in a dry place.
CAUTION:
When the fan is not facing front, do not force the fan to turn. Use the swivel
function.
Clean the fan and guard referrring to [ How to Clean], then store it.
How to Disassemble the Base
P8-14606
P7-14606
