13
14
mode, LED only displays the set level, which doesn’t change with the wind speed, same as
natural wind.
High speed: 30 minutes at high speed, 30 minutes at medium speed, 30 minutes at
low speed
Medium speed: 30 minutes at medium speed, 30 minutes at low speed
Low speed: running at low speed natural wind
-
Smart: Integrates NTC (
thermal resistance
)
detecting ambient temperature
The specific functions of smart mode are as follows: When the ambient temperature is
below
77°F, it runs at low speed wind; when the ambient temperature is
77-84.2°F, it runs
at medium speed wind; when the ambient temperature is above
84.2°F, it runs at high
speed wind. Meanwhile, when the smart mode is turned on, the ambient temperature
digital tube + smart mode ind wind speed indicator flash three times
simultaneously at one second interval to prompt that smart mode is enabled, and the
corresponding wind speed indicator turns on; you can press the Speed button to cancel
the smart mode and return to normal wind.
7. Swing button
a. In power state, press this button to switch on/off the rotary blades; the corresponding
indicator displays its function; the blades rotate 360° clockwise.
b. Press and hold the “Swing” button and “Timer” button simultaneously for 3 seconds to
cancel the sound; press and hold the two buttons again to turn on the sound.
Protection function
1. Tank water shortage protection:
a. If the software detects a tank water shortage, the protection will switch off for 5
seconds continuously. When the water pump has been running for 45 seconds, the
pump stops working. The buzzer will send a Beep Beep alarm sounds for 10 seconds.
b. Press the Cooling/Humidify button for three times within three seconds after power on,
and the device sends Beep Beep sound (same as the sound of 5-50°C forced heating of
the heater) and enters the quick water shortage detection status.
c. In quick water shortage detection status, press the power button and then press the
Cooling/Humidify button, and the device will detect water shortage in 3 seconds
(originally 50 seconds), and sends water shortage alarm.
d. The quick water shortage detection is canceled after pressing the Power off button.
2. Tank extraction protection:
When the water tank is extracted, the machine power is cut off and the buzzer sends Beep
Beep sound; when the water tank is put back, the buzzer sends Beep Beep sound, and the
power enters standby mode.
3. Power failure memory function
In power on state, when power is restored after power failure, it sends "bi" sound 10 times
(once per second), no display or action; after 30 seconds, it resumes the previous state (all
functions are restored).
a. If you press the Power on/off button within 30 seconds, it resumes the previous state
immediately.
b. If the power is cut off in power off state, it is still off when the power is restored.
4. Auto power-off function
If the device has been running for 15 hours continuously in default state after power on and
there is no operation, it automatically turns off; if you want to cancel this function, press
and hold the "C Mode" button for 3 seconds, the buzzer sends Beep sound, and
cancels auto power-off function; press and hold the two buttons again, the buzzer sends Bi
sound and resumes auto power-off function
Filling water:
Before turning on the cooling and humidification function, please add water to the tank.
Before adding water, first open the knob of water tank lock, tank out the water tank and fill
water into the tank slowly (Fig. 1, 2, 3 & 4): after adding water, put the water tank into the
original position, and then re-lock the knob of the water tank lock.
