Keysight Y1215B, Installation Notes, Page: 1 / 8

Keysight Y1215B Flush Mount Rack Kit,
Keysight Y1216A Recessed Mount Rack Kit
Installation Note
This installation note contains procedures for installing either the Y1215B Flush
Mount Rack Kit or the Y1216A Recessed Mount Rack Kit for the Keysight
M9018A 18-slot PXIe Chassis in a Keysight rack. Both kits are similar; the
difference being the length of the mounting brackets.
The parts included with the Y1215B and Y1216A are listed in the following tables
(note that not all parts listed are available as field-replaceable parts).
Y1215B Flush Mount Kit
These kits are designed for Keysight racks and the rear brackets may not fit
a non-Keysight rack. A non-Keysight rack may require the use of support
rails.
Part Number Description Quantity
M9018-00107 Flush Mount Front Bracket 2 (See
Figure 2
)
M9018-00108 Rear Frame Bracket 2 (See
Figure 2
)
M9018-00209 Rear Bracket 2 (See
Figure 2
)
M9018-20101 Front Handle 2 (See
Figure 2
)
0590-0804

Channel Nuts, 10-32 x 0.5 8
2680-0278 10-32 x 0.5 Pan Head T25 Torx Screws 
(Rear Frame Bracket to Mtg Bracket)
4
0515-0386

M5 x 0.8 x 10 mm Pan Head T25 Torx Screws W/Washer 4
0570-1577 10-32 Pan Head Dress Screws for Rack Flanges (painted to match
the brackets)
4
0515-5828 M4 x 0.7 x 10mm Phillips Flat Head Screws w Patch Lock (8 on
brackets, 4 on handle)
12
0515-5827 M5 x 0.8 x 8mm Phillips Flat Head Screws w/Patch Lock 4
8710-2727

Offset Screwdriver 1