TAP Test Plan
3
Keysight X8711A IoT Device Functional Test Solution User’s Guide
36
WLAN Measurement Suite
Once you have installed the WLAN measurement suite, you should see the
following WLAN
r
elated test plans listed in the
C:\Program Files\Keysight\TAP8\IoTDeviceTest\TapFiles
directory. These test
plans are only applicable for those who are using the KS8400A TAP Developer’s
System.
– WLAN Signaling Test
– WLAN Signaling PER Sensitivity Test
For those who are using the KS8000A TAP Deployment System, it is
recommended to use the pre-configured test plans found in the
C:\Program Files\Keysight\TAP8\IoTDeviceTest\TapFiles\CLI
directory.
– WLAN Signaling Test
– WLAN Access Point Device Discovery
– WLAN Signaling PER Sensitivity Search Tests
– WLAN Signaling PER Linear Adjustment Tests
– WLAN Signaling Go-NoGo Tests
Refer to
to verify your
34972A
instrument connection
before using this package.
NOTE
– Test plans created prior the measurement suite <version 2019.0118> will
need to be recreated. See
for instructions on how to create and
customize a test plan.
– The test plans <version 2019.0118> will begin with the Initialize WLAN radio
step. You will find the version number when you install the measurement
suite as shown in the example in
.
