Keysight U8903B, User Manual

Page: 573 / 605

Appendixes A
Keysight U8903B User’s Guide 573
Example 2: Establishing a connection to a Bluetooth device and generating
a sine waveform with the Bluetooth generator.
In this example, you will learn how to establish an A2DP profile connection to a Bluetooth
device and generate a sine waveform with the U8903B’s Bluetooth generator.
1 Connect the Bluetooth RF1 port to the DUT RF port using an RF cable.
2 Press on the FUNCTION panel to switch to audio generator mode, and press
on the FUNCTION panel to switch to Bluetooth interface.
3 Press Waveform , and select
Sine
as the waveform type.
4 Press Link Config > Common Settings , and select
Profile
as A2DP SRC, HFP AG, AVRCP
TRGT.
5 Press Link Config > Device Scan , and select
Device Search
to scan for all discoverable
Bluetooth device.
6 Press Link Config > Device Action , and select the Bluetooth device to be paired. Press
Pair
Device
to begin the pairing procedure.
7 Press Link Config > Device Action , and select
Profile Connection
as Connect A2DP to
connect using the A2DP profile.
8 Press Link Config > Device Action , and select A2DP Operation as Open Media Connection to
establish the media connection and start the audio streaming from the Bluetooth card
to the connected device.
9 Press Waveform Config > Frequency , and set the frequency to 1 Vrms.
10 Press Waveform Config > Amplitude , and set the amplitude to 2 FFS.
11 Press to start the signal generation on the Bluetooth generator channel 1.
12 After you have completed the steps above, the U8903B display should look as follows.