Keysight U8903B, User Manual

Page: 424 / 605

A Appendixes
424 Keysight U8903B User’s Guide
Appendix 3: System Panel Menu Tree
Table A-3 SYSTEM panel menu tree description
Key Level 1 Level 2 Level 3 Description
Preset
(Current mode) Reset the current mode to its default settings.
Save User State Save the current user state.
Mode
Reset all modes to the default settings without
deleting the user-defined files.
To Factory Settings
Reset the U8903B to the factory default settings,
delete all the files saved in the internal flash
memory (for example, state file, arbitrary
waveform, test sequence project files, and so on),
and reset the GUI state to the Standard View
mode. If the HP8903B mode is turned on, the GUI
state will remain at the HP8903B mode.
User State
Reset the U8903B to the previously saved
user state.
Utility
(if the mode is in the
Analyzer or Generator
mode)
Save Channel (x)
(x) = current channel
number
Save the current channel state to a file.
Refer to “
Appendix 12: Save Menu Tree ” on
page 493 for the save menu tree.
Save (x)
(x) = current mode
Save the current mode state to a file.
Refer to “
Appendix 12: Save Menu Tree ” on
page 493 for the save menu tree.
Recall
Recall a saved U8903B state from a file.
Refer to “
Appendix 13: Recall Menu Tree ” on
page 494 for the recall menu tree.
Copy To
Copy the current channel state to other
channel(s).
Copy From
Select a channel number to copy the state to the
current channel.
File Explorer Rename, delete, copy, or move files.
Utility
(if the mode is in
Graph Analysis mode)
Save Graph
Save the current graph state to a file.
Refer to “
Appendix 12: Save Menu Tree ” on
page 493 for the save menu tree.
Save Channels
Settings
Channel (x)
(x) = current channel
Save the current channel graph state to
a file.
Refer to “
Appendix 12: Save Menu Tree ” on
page 493 for the save menu tree.
All Channels Settings
Save all channels graph state to a file.
Refer to “
Appendix 12: Save Menu Tree ” on
page 493 for the save menu tree.