Keysight U4421A MIPI D-PHY Analyzer and Exerciser Hardware and Probing Guide
5
About This Guide
This guide describes the stimulus and acquisition probing options available for use with the U4421A
module. It describes how to make probing connections from the device under test (DUT) to the
Keysight U4421A module for various probing situations.
See Also
•
For information on Keysight AXIe chassis, U4421A module, how to set up the chassis, module,
and host computer and how to obtain and install the associated software components, see:
"Keysight AXIe based Logic Analysis and Protocol Test Modules Installation Guide"
. This guide
is available on
and is also installed with the Logic Analyzer software.
•
For information on how to use the U4421A module for stimulus and analysis, refer to the
Keysight
Logic and Protocol Analyzer software's online help
.
•
Detailed information on Keysight probes supported for the U4421A module (such as the Keysight
E5381A differential flying lead probe) is available by searching for the probe’s product number at
