Keysight U4421A MIPI D-PHY Analyzer and Exerciser Hardware and Probing Guide
21
Determining the Extent of Signal Degradation with Acquisition Probes
3
Probe Load Model for E5381A Flying Probe
The E5381A probes have an input impedance which varies with frequency, and depends on which
probe attachment accessories (see
) are being used to connect the flying leads of the probe to
DUT. The following screens show the circuit load model for the input impedance of the probe with
various supplied accessories..
Figure 3
Equivalent probe load model when using the Coaxial Tip Resistor as the attachment accessory
