Keysight U3606A, Programmer'S Reference Manual

Page: 245 / 372

SENSe Subsystem 9
[SENSe:]DCYCle:VOLTage:RANGe[:UPPer]
U3606A Programmer’s Reference 231
[SENSe:]DCYCle:VOLTage:RANGe[:UPPer]
Syntax
[SENSe:]DCYCle:VOLTage:RANGe[:UPPer]
{<voltage_range>|MIN|MAX|DEF}
This command selects the measurement range for duty cycle measurements
via the voltage path.
[SENSe:]DCYCle:VOLTage:RANGe[:UPPer]? [{MIN|MAX}]
This query returns a numeric value that represents the duty cycle
measurement range via the voltage path.
Parameter
Remarks
• Selecting a discrete range will disable autoranging.
•
If the input signal is greater than can be measured on the selected
range (manual ranging), the instrument gives an overload indication.
• Positive overload: “ +9.37 ” or “OL” from the front panel.
• Negative overload: “ -9.37 ” or “–OL” from the front panel.
N O T E
The
[SENSe:]DCYCle:VOLTage:RANGe[:UPPer]?
query is not
applicable when autoranging is enabled. It is recommended to manually
select the voltage range for frequency, pulse width, and duty cycle
measurements.
Item Type Range of values Default value
voltage_
range
Numeric • 100 mV|MIN
• 1 V
• 10 V
• 100 V
• 750 V|MAX
• DEF (AUTO)
MIN