Keysight U3606A, Programmer'S Reference Manual, Page: 142 / 372

6 MEASure Subsystem
MEASure[:VOLTage]:AC?
128 U3606A Programmer’s Reference
MEASure[:VOLTage]:AC?
Syntax
MEASure[:VOLTage]:AC?
[<range>|AUTO|MAX|MIN|DEF[,{<resolution>|MAX|MIN|DEF}]]
This command first resets all AC voltage measurement parameters and
trigger parameters to their default values. Then, it configures the
instrument for AC voltage measurements and immediately triggers a
measurement. A single reading is returned.
Parameters
C A U T I O N
• The maximum range parameter is 750 V
rms
, which is set by MAX.
The rms voltage is waveform dependent. A sine wave is limited to
750 V
ac
(rms), but a 1000 V
pk
square wave is safe. Connections to
AC MAINS are further limited to CAT II (300V).
• See the “Safety Information” section in the U3606A User's and
Service Guide for a complete discussion of the safety features, and
the procedures for safe operation of this instrument.
Item Type Range of values Default value
range Numeric • 100 mV|MIN
• 1 V
• 10 V
• 100 V
• 750 V|MAX
• AUTO
AUTO
resolution Numeric • MAX (4½ digit)
• 10 uV
• 100 uV
• 1 mV
• 10 mV
• 100 mV
• MIN (5½ digit)
• 1 uV
• 10 uV
• 100 uV
• 1 mV
• 10 mV
MIN