Keysight N9923A, User Manual, Page: 195 / 276

Keysight N9923-90001 User’s Guide
195
File Management
Saving and Recalling Files
—Press
Cancel
to return to edit the filename.
Recall Files
The FieldFox can recall
State
files,
Trace + State
files, and image files.
State Files
ALL FieldFox instrument settings for ALL Modes are saved and recalled in a
*.sta file. If error correction is ON in CAT or NA Mode, then calibration data is
also saved and recalled.
If error correction is OFF (CalRdy is active), calibration data is NOT saved in the
*.sta file. When a Trace + State file is recalled on a FieldFox other than the one
it was saved on, differences in the CalRdy calibration data may result in
differences between the displayed traces.
Image Files
The FieldFox can open and display *.png, *.jpg, and *.jpeg images.
How to Recall a *sta File
— Press
Save/Recall 9
— Then
Recall
— Navigate to the file to be recalled using the Up/Down arrow keys.
— Optional:
Sort by Name
to list the current files by name.
— Optional:
Sort by Date
to list the current files by date.
— Optional:
Next Page
if available, to go to the next page of filenames.
— Optional:
Previous Page
if available, to go to the previous page of
filenames.
— Then Recall File or Enter .
— Cancel to cancel recall file and return to the previous menu.
Move (Copy) Files
The FieldFox can Move files (i.e., including Trace + State files, and image files).
How to move a file
— Press
Save/Recall 9
Before recalling a file, first set File Type to State or Trace + State, and also
Select Device from which the file will be recalled.