manualshive.com logo in svg

Keysight N9923A, Service Manual, Page: 79 / 138

Share
Download
Keysight N9923A Service Manual Download Page 79

 6-12                                                                                                         Keysight N9923A Service Guide 

Replaceable Parts
Replaceable Parts Listings

6-

Figure 6-5 

Hinge Spacer Locations 

Miscellaneous Parts

Table 6-1 

Part Numbers for Miscellaneous Parts and Accessories 

Description

Model or Part 

Number

Repair and Re-assembly Kit

IMPORTANT

This kit is required each time the N9923A case is opened for any reason.

The kit includes the following items, some or all of which are necessary to re-assemble the internal assemblies and the 

case, depending upon the depth of the repair.

Repair and Re-assembly Kit (Includes the following items.)

  Gasket, for blank side panel (larger size); qty 1

  Gasket, for I/O side panel (smaller size); qty 1

  Screw, machine, w/flat washer, pan head, M3.0 x 35 mm; qty 6

  Screw, machine, 90-deg flat head, M3.0 x 5 mm; qty 15

  Screw, machine w/crest cup washer, pan head, M3.0 x 6 mm; qty 6

  Screw, machine w/crest cup washer, pan head, M3.0 x 10 mm; qty 4

  Screw, machine w/patch lock, pan head, M2.5 x 6 mm; qty 4

  Screw, machine, 90-deg flat head, M3.0 x 14 mm; qty 6

  Tape, 1/4-inch x 1-inch, for LCD ribbon cable; qty 3

N9912-60027

N9912-40002

N9912-40003

0515-5153

0515-1521

0515-0430

0515-0374

0515-1940

0515-2349

N9912-20043

Service Tools

Summary of Contents for N9923A











































































































































Reviews:

No comments