manualshive.com logo in svg

Keysight N9913B, User Manual, Page: 286 / 896

Share
Download
Keysight N9913B User Manual Download Page 286

 286                                                                                                                     Keysight N9938-90006 User’s Guide

RTSA (Real-time Spectrum Analyzer) Mode—Option 350
Record/Playback (RTSA Option)

Playback Configuration

By default, trace sweeps are played back as fast as the trace can be drawn on 

the screen. The following setting allows you to slow playback. In addition, you 

can manually scroll through individual traces using Playback Trace, or scroll 

through State and User Tags using Playback State/Tag. Learn more in 

How to 

Playback a Session

 in 

“How to Playback a Session” on page 283

.

To slow playback of a session:

1.

Record a new session or Open an existing session.

2.

Press 

Playback Configuration

3.

Press 

Playback Interval

4.

Enter a value in seconds between 0 (no delay) and 100 using the numeric 
keypad, 

 arrows, or the rotary knob. After using the keypad, select a 

multiplier key. Learn about multiplier abbreviations.

5.

Press 

Enter

Manage Sessions

1.

Press 

Trace 6

 

>

 

Record Playback

2.

Press 

Record Playback Setup

 The following selections are available ONLY 

when a session is NOT open. 

3.

Press 

Storage Device

 to select the media which stores the sessions to be 

managed. This is a different setting from the Save/Recall Storage Device 

setting. 

4.

Choose from the following:

—

Internal

 FieldFox memory (default)

—

SD Card

 An external SD Card (must be inserted) 

—

USB

 An external USB flash drive (must be inserted)

5.

Press 

Manage Sessions

6.

Choose from the following:

—

Rename

 Using the FieldFox labeler, change the name of the session. 

AutoSession (n) is the default name where (n) is the next-available 

number. Learn more in 

“How to use the FieldFox labeler ” on 

page 807

.

If these are large recordings on a device, it could take several seconds for 

the FieldFox to display the list.

Summary of Contents for N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments