Keysight N9913B User Manual Download Page 193

Page: 193 / 896

Keysight N9938-90006 User’s Guide 193

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings

Some Detector and Video Bandwidth settings will raise the Auto Sweep

Acquisition value greater than 1. In these cases, manually setting Sweep

Acquisition lower than the Auto value may have NO effect.

Learn more about SA mode SwpAcquisition time in the

Supplemental Online

Help:

https://edadocs.software.keysight.com/kkbopen/fieldfox-manuals-firmware

-software-and-product-support-589310103.html

(via FieldFox Manuals,

Firmware, Software and Product Support).

Very Long Sweep Times

Two primary settings are responsible for the sweep time: Res BW and

SwAcquisition.

— When the sweep time exceeds 1200 seconds (20 minutes), an informational

message:

Alert: Very long sweep in progress…

is annotated on the screen

for the duration of the sweep.

— When the sweep time exceeds 4000 seconds (about 1 hour),

Meas UNCAL

is annotated on the screen. Accuracy cannot be guaranteed.

— InstAlign is always performed only at the beginning of the sweep regardless

of the sweep time. Learn more in

“How to Access Individual Alignments”

on page 208

Zero Span Measurements

When setting the frequency span to Zero, there is NO spectrum of frequencies

to display, so the X-axis units becomes Time. The SA becomes like a tunable

oscilloscope, with the center frequency being the frequency of interest. This

capability is useful for analyzing modulation characteristics, such as pulsed

measurements.

Measurement speed specifications do NOT apply in Temperature Control

Mode. Learn more in

“Temperature Control Mode” on page 33

For non-zero span measurements, refer to

“Sweep Acquisition” on

page 191

Summary of Contents for N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N9913B

Reviews:

Keysight N9913B, User Manual, Page: 193 / 896

Search results

Summary of Contents for N9913B

Reviews: