Keysight N9913B User Manual Download

Page: 129 / 896

Keysight N9938-90006 User’s Guide 129

Calibration for NA, CAT, and VVM Modes

Mechanical Cal

Mechanical Calibration is performed using discrete standards from a Cal Kit.

Several Cal Kit definitions are built into the FieldFox. To learn about Cal Kit

definitions, refer to the Application Note, “Specifying Calibration Standards

and Kits for Keysight Vector Network Analyzers,” available online at

https://www.keysight.com/us/en/assets/7018-01375/application-notes/598

9-4840.pdf

Mechanical Cals are extremely accurate when performed using the correct Cal

Kits with standards that are clean and in good repair, and when using correct

connection procedures.

How to perform a Mechanical Cal

— Disconnect the DUT from the FieldFox.
— If a jumper cable or adapter is required to connect the DUT to the FieldFox,

then connect

those

components to the FieldFox connectors. The effects of

those components will be measured and removed during the calibration,

and only the effects of the DUT will be displayed in the measurement

results.

These should be high-quality components!

— In NA, CAT, or VVM Mode, press

Cal 5

— Then

Mechanical Cal

This page summarizes the Mechanical Cal to be performed and allows you to

make changes. For best results, review the screen and make changes in the

following order:

Visit

www.keysight.com/find/fieldfoxsupport

to see a complete list of

supported Cal Kits. Also at this website, download Data-Link software that

allows you to edit Cal Kit definitions or add a new Cal Kit.

Summary of Contents for N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands

Keysight N9913B, User Manual

Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands