Keysight N7744A, User Manual

Page: 24 / 105

C A U T I O N
The Trigger In is a TTL input. A maximum of 5 V can be applied as an external voltage
to this input connector.
The Trigger Output is a TTL output. Do not apply an external voltage to this
connector.
No external voltage should be applied to the analog output connectors of the
N7747A and N7748A.
LAN Interface
LAN Interface
This section explains the concept of LAN in details.
Selecting a LAN Network
For the purposes of this guide, a private (isolated) LAN network is
defined as a network configuration in which instrument access is a
direct connection between the computer and the instrument, or to
multiple instruments connected via a
dedicated router or switch. A site
(company-wide) LAN is defined as a network in which instrument
access is available to many users at on-site and remote locations. The
instrument’s application and/or your company’s IT (Information
Technology) department may have guidelines that help decide the type
of network (private or site) used. If a network configuration has not
been determined, refer to the following considerations concerning each
type.
Private LAN Considerations
Among the basic parameters of a private LAN network to consider are
security, performance, reliability, and IP address availability.
Getting Started
1
Keysight N774x Series 23