1
Troubleshooting
14
Keysight RP7900 Series Advanced Service Guide
Safety Precaution
on page 3 and the
on page 7 before proceeding with the rest of this
chapter.
Ensure that all safety precautions are observed during all phases of operation of
this instrument. Failure to comply with these precautions or with specific warnings
or instructions elsewhere in this manual or in the
RP7900 Series Operating and
Service Guide
violates safety standards of design, manufacture, and intended use
of the instrument. Keysight Technologies assumes no liability of the customer’s
failure to comply with the requirements.
This manual serves as a complement to the
RP7900 Series Operating and Service
Guide
. Only qualified, service-trained personnel who have read the
Operating and
Service Guide
prior to this should attempt the procedures listed in this manual.
WARNING
A WARNING notice denotes a hazard. It calls attention to an operating
procedure, practice, or the like that, if not correctly performed or adhered to,
could result in personal injury or death. Do not proceed beyond a WARNING
notice until the indicated conditions are fully understood and met.
CAUTION
A CAUTION notice denotes a hazard. It calls attention to an operating
procedure, practice, or the like that, if not correctly performed or adhered to,
could result in damage to the product or loss of important data. Do not
proceed beyond a CAUTION notice until the indicated conditions are fully
understood and met.
