Installation Note N5225-90107 5
Description of the Upgrade
Getting Prepared
Using the information just gathered, you must request license key(s) for your A
model or for your B models, a license key file(s) from the Keysight Software
http://www.keysight.com/find/softwaremanager
.
You will need to provide an email address, Keysight will promptly email your A
model license key(s) or a for a B model, license key file(s) attachment message.
Refer to
“License Key File Redemption” on page 4
.
Verify the License Contents
Refer to the license message you received from Keysight:
If the model number, serial number, or option number do not match those on
the license message you received from Keysight, you will not be able to install
the license key file. If this is the case, contact Keysight for assistance. Refer to
“Getting Assistance from Keysight” on page 3
.
Downloading the Online PNA Service Guide
To view the online Service Guide for your PNA model number, use the following
steps:
1. Go to
.
2. In the Search box, enter the model number of the analyzer (Ex: N5242A)
and click
Search
.
3. Click
Technical Support
>
Manuals
.
4. Click
Service Manual
.
5. Click the service guide title to download the PDF file.
6. When the PDF of the Service Guide is displayed, scroll through the
Contents section bookmarks to locate the information needed.
Protecting Your Workspace from Electrostatic Discharge
For information, click on the Chapter 1 bookmark, “Electrostatic Discharge
Protection” in the PDF Service Guide.
ESD Equipment Required for the Installation
Description
Keysight Part Number
ESD grounding wrist strap
9300-1367
5-ft grounding cord for wrist strap
9300-0980
2 x 4 ft conductive table mat and 15-ft grounding wire
9300-0797
ESD heel strap (for use with conductive floors)
9300-1308
