36 Installation Note N5222-90119
Installation Procedure for the Upgrade
-
Step 32. Enable Options 419
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— A keyboard and mouse must be connected to the network analyzer.
— Refer to the license message you received from Keysight: Verify that the
analyzer’s model and serial numbers match those on the license message
you received from Keysight.
— Obtain your license key file(s) for installation of this upgrade by following
the instructions on the supplied Software Entitlement Certificate.
Option Enable Procedure
1.
Locate the email(s) from Keysight which contain license file attachments.
“Step 1. Obtain a Keyword and Verify the
.
2.
Copy the license file(s) from the email(s) to the
root directory
flash drive. More than one license file may be copied to the USB flash
3.
Insert the USB flash drive into the PNA’s USB drive slot.
4.
The instrument automatically reads the license file(s) from the USB flash
drive, validates the file(s), and installs the option(s). Generally, warnings
or error messages may be ignored.
5.
Wait >1 minute for your Option to be installed.
The instrument will not prompt you when the upgrade has been
completed.
6.
The PNA application automatically restarts after the option installation has
been completed.
For this step, you will need a USB flash drive.
A single license file may contain licenses for more than one instrument.