Keysight N5221BU-677 Page 11 Installation Note Download

Page: 11 / 54

Installation Note N5222-90129 11

Items Included in the Upgrade Kit

Check the contents of your kit against the following list. If any part is missing or

damaged, contact Keysight Technologies. Refer to

“Getting Assistance from

Keysight” on page 4

Table 2

Contents of Upgrade Kit N5222-60129

Ref

Desig.

Description

Qty

Part Number

Installation note (this document)

N5222-90129

Software Entitlement Certificate

5964-5145

China RoHS Addendum

9320-6722

26.5 GHz source (2) board

5087-7342

A11

Direct digital synthesizer (DDS) assembly, (x4) – (Replaces A11 x2 DDS assembly.)

N5240-60102

A22

Splitter

5087-7139

A24

Mixer brick (2)

5087-7829

A26

Test port 3 receiver coupler

5087-7757

A27

Test port 4 receiver coupler

A30

Test port 3 coupler

5087-7813

A31

Test port 4 coupler

A35

Test port 3 source attenuator

33321-60077

A36

Test port 4 source attenuator

A43

Test port 3 receiver attenuator

33321-60078

A44

Test port 4 receiver attenuator

Dress panel, overlay – 4-Port

N5240-00009

Machine screw, M3 x 8, pan head ((x2) A24 mixer (2) brick assembly, (x8) A35/36

source attenuators, A42/A44 receiver attenuators)

0515-0372

Machine screw, M4.0 x 10, pan head (to attach the following boards to the analyzer

chassis: A11 direct digital synthesizer (DDS) board and A8 26.5 GHz source board.)

0515-0380

Machine screw, M3.0 x 6, pan head (to attach source and receiver attenuator

assemblies to test set deck) – (to attach (x4) A26/A27 receiver coupler assemblies to

test set deck, (x6) A35/36 source attenuators, A42/A44 receiver attenuators)

0515-0430

Machine screw, M3.0 x 20, pan head (to attach brackets to receiver couplers; to

attach A24 mixer brick to brick)

0515-1410

Machine screw, M3.0 x 6, flat head (to attach front frame to coupler plate)

0515-1946

Machine screw, M3 x 14, pan head (to attach splitter to mixer brick)

0515-2994

Summary of Contents for N5221BU-677























































Search results

Summary of Contents for N5221BU-677

Reviews:

Related manuals for N5221BU-677

Brands by name

Popular brands

Keysight N5221BU-677, Installation Note

Search results

Summary of Contents for N5221BU-677

Reviews:

Related manuals for N5221BU-677

Brands by name

Popular brands