Using the Probes
1
N2795/6A User’s Guide
17
Flexible Nose Clips
You can use flexible nose clips to
make connections to components
or wires with leads that are 1.01
mm (0.04 inches) in diameter or
smaller. With today’s miniature IC- and
component-packaging techniques, these clips
can make probing challenging devices much
easier. Most users prefer to attach the clips to the probe via the
Y-lead adapter as shown in the picture below. Press the back of the
flex nose clip to extend the grasping hook and then release to
tighten the hook around the component you are testing.
Figure 8
Probe with Flexible Nose Clips Attached
Summary of Contents for N2795/6A
