24
Keysight UXR-Series MultiScope Hardware Configuration Guide
4
Next Steps
Use MultiScope Control Software
After the MultiScope system hardware has been configured and you have
performed each oscilloscope’s calibration procedure, you can use MultiScope
control software to make data acquisitions. Your options are:
• Infiniium oscilloscope software on the Leader oscilloscope. MultiScope
software is included as a standard feature.
• D9010BSEO Infiniium Offline oscilloscope analysis software on an external host
computer. MultiScope software is included as a standard feature.
Infiniium Oscilloscope Software on the Leader Oscilloscope
With Infiniium oscilloscope software version 10.20, the MultiScope hosted
instruments capability is available from within an Infiniium UXR-Series
oscilloscope (in the box) as well as from the Infiniium Offline software running on a
PC. Connecting to and controlling multiple oscilloscopes from within an Infiniium
oscilloscope has the following advantages:
• You have the full triggering capability of the Infiniium oscilloscope, including
InfiniiScan. (From the Infiniium Offline software, you have only edge and glitch
trigger modes.)
• No additional computer is required to run the Infiniium Offline software.
• No space for an additional computer is necessary.
MultiScope software is included as a standard feature.
Refer to the Infiniium oscilloscope software’s
Online Help
for instructions on
setting up and controlling the MultiScope system. In particular, note that, on the
Leader oscilloscope, you must set up remote connections to the Follower
oscilloscopes using the Keysight Connection Expert (which is part of the Keysight
IO Libraries Suite).
D9010BSEO Infiniium Offline Oscilloscope Analysis Software
The D9010BSEO Infiniium Offline oscilloscope analysis software lets you identify
oscilloscopes in a MultiScope system, perform time-correlation calibration
(including channel deskew, see
capture data, view waveforms, and perform analysis.
Refer to the D9010BSEO Infiniium Offline oscilloscope analysis software’s
Online
Help
for instructions on setting up and controlling the MultiScope system. In
particular, note that, on the host computer, you must set up remote connections
to the Leader and Follower oscilloscopes using the Keysight Connection Expert
(which is part of the Keysight IO Libraries Suite).
Summary of Contents for MultiScope UXR Series
