Keysight M9703A Hardware Extension of 89600 VSA Software
Keysight M9703A Hardware Extension of 89600 VSA
Software
The 89601B: 89600 VSA software supports the Keysight M9703A AXIe High-Speed
Digitizer. This VSA measurement hardware configuration offers broadband vector
signal analyzer measurements up to 625 MHz of analysis bandwidth (model
dependent).
Model
Bandwidth
M9703A-SR1
390 MHz
M9703A-SR2
625 MHz
That the M9703A is not supported by the earlier 89601A VSA software, neither by
the 32-bit version of the current software i.e. You must use the 64-bit version of
the 89600 VSA software with M9703A.
Configuring the 89600 VSA software application to use the
M9703A hardware
1. Start the 64-bit version of the 89600 VSA software application.
2. Configure the M9703A digitizer as the VSA measurement input by creating an
'Analyzer Configuration'
that uses the M9703A digitizer as the
Logical Instru-
ment
(ADC) by performing the following steps:
a. From the menu, go to Utilities > Hardware > Configurations, and click on
Add New Configuration button (
). This will open the 'New Hardware
Configuration' dialog.
22
Keysight M9703A Startup Guide
