M9514A AXIe Chassis 14-Slot
Site Preparation and Installation Guide
17
2
Receive and Uncrate the Chassis
Inspect for damage
Before unpacking the chassis, carefully inspect the shipping container for any
shipping damage. Report any damage to the shipping agent immediately, as
such damage is not covered by the warranty.
To find warranty information on your M9514A AXIe chassis, go to
www.agilent.com/find/warranty
and enter your model number (
M9514A
) in the
Product Number
field, and enter the serial number from the chassis rear panel in
the
Serial No.
field.
Inventory the Shipment
Use the packing list that comes with your system to ensure you received all
pieces of the system.
Your shipment should include the following:
-
M9514A Chassis
1
(does not include slot covers)
-
A box inside the shipping container with:
–
M9514A Site Preparation Guide (printed version)
–
M9514A Startup Guide (printed version)
–
Power cord.
Chassis exceeds 48 kg. Use a mechanical lift to lift the chassis. The
chassis should be transported using a rolling cart. Do not lift the
chassis by the handles on the front and rear of the chassis. If you
plan to mount the chassis at the top of a rack (see
on page 35) the mechanical lift must be
able to raise the chassis to approximately 60” (1.5 meters).
To avoid damage when handling the AXIe chassis and modules, do
not touch exposed connector pins.
1 Any AXIe modules you ordered from Agilent do not come pre-installed; they are in separate shipments.
