Keysight M9502A, User Manual

Page: 28 / 142

18 Keysight M9502A/M9505A AXIe Chassis User Guide
Introduction Safety-Related Specifications
Chassis Weight
AC Power Supply Requirements
Chassis Power Dissipation
DC Power Supply Output
Chassis Weight (as shipped, no modules) Weight (maximum, all slots filled)
M9502A 7.7 kg 15.7 kg
M9505A 13.3 kg 33.3 kg
M9502A M9505A (Serial Number
TW51150212 and earlier)
M9505A (Serial Number
TW51160201 and later)
Operating voltage range: 100-240VAC 100-120VAC 200-240VAC 100-240VAC
Input frequency range: 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz
Input power consumption: 800 VA 865 VA 1350 VA 1280VA
Overcurrent protection: auto recovery auto recovery auto recovery
Efficiency (typical): 85-90% 85-93% 85-93%
Airflow Direction
Slot airflow direction Right to left
Chassis cooling intake Right side of chassis
Chassis cooling exhaust Left side of chassis
Power dissipation, per instrument slot 200W maximum
* see table below
M9502A M9505A
(Serial Number TW51150212 and earlier) M9505A
(Serial Number TW51160201 and later)
DC Output 50V 52V 52V
Total DC Power 520W 100VAC - 120VAC: 680 W
200VAC - 240VAC: 1020 W
*
100-240VAC: 1020W*
* M9505A configurations that consume more than 850W (200-240V) or 400W (100-120V) total power across all 5 slots may experience
occasional system reset if installed in environments prone to line voltage dropouts in excess of 20ms. In such an event, the PC controlling
the chassis will require a restart of reboot. To avoid system resets due to line dropouts, use an uninterruptable power supply.
This instrument has auto-ranging line voltage input, be sure the
supply voltage is within the specified range and voltage
fluctuations do not to exceed 10 percent of the nominal supply
voltage.