![Keysight M9485A Startup Manual Download Page 20](http://html1.mh-extra.com/html/keysight/m9485a/m9485a_startup-manual_1961315020.webp)
20
Getting Started
STEP 3. Install the Network Analyzer Modules
e. In the case of Configurable Test Set, there are several options of divider
“Configurable Test Set (M9377A and M9378A)
for the full combinations.
f. Tighten the top mounting screw (see callout 7 in
) and the
bottom mounting screw (located below the injector/ejector handle) on
the module(s) using a Phillips #1 torque drive set to 4 in-lbs (0.45 N.m).
Figure 1-10 Alignment Plate Installation