Keysight M9484C, Getting Started And Troubleshooting Manual

Page: 50 / 141

50 M9484C Startup Guide
Front and Rear Panel Features
Front Panel Features
Two Channel, 6.0 GHz or 8.5 GHz with Analog I/O
For M9484C Option 001 + 002, Option 506 or 508, and Option ANI
Item Connector Type
Description
# Name
1 SS - USB 3.0 USB Type-A
female Host controller, SuperSpeed, 900 mA (nominal)
2 USB-C PD USB Type-C
female Reserved for future use. The front panel USB 3.0 Type C connectors
do not have USB-compliant pin configurations. Do not use these
ports for any USB devices as damage may occur.
3 Aux I/O Micro HDMI
Type D Auxiliary Input/Output port
(Note: This is not intended for an external monitor)
12 bit single-ended IOs
50 MHz maximum frequency (drive or receive)
As a Driver:
— 3.3 V Output
— Max voltage applied at any output in high-Z state is
5.5 V, 3.8 V when high or low state
— 50 Ω output resistance
As a Receiver:
— 3.3 V output
— 5 V tolerant input (damage at 5.5 V)
— 10 k
Ω input termination
4
19.2 GHz In
a SMA 19.2 GHz input
50 Ω impedance -5 dBm to +10 dBm