Keysight M9380A, Startup Manual

Page: 12 / 40

Step 2: Verify M9380A Shipment Contents
your instrument may be repaired and calibrated without your M9300A. Doing so, however, will effect your cal-
ibration schedule, since repairs are followed by calibration. The Calibration Due Date for your M9300A will
not match the date of your other modules.
1. Review the warranty information shipped with your product.
2. Contact Keysight to obtain a Return Material Authorization (RMA) and return address. For assistance finding Keysight
contact information, go to www.keysight.com/find/assist .
3. Write the following information on a tag and attach it to the malfunctioning equipment:
l
Name and address of owner. A P.O. box is not acceptable as a return address.
l
Module serial number(s). The serial number label is located on the side panel of the module. The serial num-
ber can also be read from the Soft Front Panel interface – after the hardware is installed.
l
Description of failure or service required.
4. Pack the instrument in its original packaging. Include all cables. If the original packaging material is not available, use
anti-static bubble wrap or packing peanuts and place the instrument in a sealed container and mark the container
“FRAGILE”.
5. On the shipping label, write ATTENTION REPAIR DEPARTMENT and the RMA number.
In your correspondence, refer to the modules by serial number and the instrument by model number.
Step 2: Verify M9380A Shipment Contents
The Keysight M9380A PXIe CW Source is a collection of modules, housed in a PXIe chassis. The minimum
CW Source consists of the software, chassis, an Keysight M9301A PXIe Synthesizer, an Keysight M9310A
PXIe Source Output and an Keysight M9300A PXIe Frequency Reference. The M9300A may be used in this
and other configurations. You may configure the Keysight M9381A PXIe Vector Signal Generator in the same
chassis and also use the same M9300A.
Items included in your Keysight M9380A PXIe CW Source Shipment
Qty Part Number Description
1 M9300-
10002
Software and Product Information CD, contains: Soft Front Panels, drivers, and all printed documentation in PDF
format
1 E2094-60003 Keysight IO Libraries Suite CD
1 M9380-
90001
Keysight M9380A PXIe CW Source Startup Guide in hard copy
1 5023-1450 Wrench, socket, extension, 5/16 inch, SMA
1 5002-3361 SMB/MMCX Cable Removal Tool
1 5972-3335 PXI Modular Product Startup Guide Reference
12
Keysight M9380A PXIe CW Source