Step 5: Verify Operation of the M9202A Module
Step 5: Verify Operation of the M9202A Module
The intention of this step is to verify correct operation of the newly installed module.
Run Keysight Connection Expert by right-clicking the task bar icon
, and select
Keysight Connection Expert.
It will display the modules that are installed. Review the configuration data and then
launch the SFP. This will provide control of the module for self test and other
operational verification procedures.
Keysight M9202A Instrument Properties
The instrument properties may be viewed by clicking on the desired instrument and
then on the Instrument Properties tab in the right panel.
Agilent or Keysight Connexion Expert (Interface differs depending on IO Library Suite version)
If the module does not appear in the Keysight Connection Expert,
first try the 'Refresh All' button. If that does not work, restart your
PC or embedded controller and start Keysight Connection Expert
again.
Keysight M9202A Installed Software
The SFP 5 application may be launched from the list installed software, by clicking the
Start Soft Front Panel button.
The SFP 1 application may be launched from Window Start Menu > Agilent > MD1
Digitizer > SFP 1.11.
18
Keysight M9202A PXIe Digitizer, Startup Guide
