Keysight M9099, Startup Manual, Page: 13 / 26

System Requirements
Keysight M9099 Waveform Creator 3.2 Startup Guide 13
System Requirements
Following are Keysight recommended configurations:
CPU 2 GHz or faster 32-bit (x86) or 64-bit (x64) processor
RAM 2 GB recommended (32-bit) / 4 GB recommended (64-bit)
Video RAM 512 MB recommended
Hard Disk 1 GB available
Additional
Drives DVD to load software; license transfer requires network access, USB Flash
drive, USB hard drive, or USB DVD drive
Operating
System Microsoft Windows® 7 Professional, Enterprise, or Ultimate (64-bit/32-bit)
Summary of Software/Hardware Compatibility with
Waveform Creator
Microsoft .NET
Framework Ensure that you have Microsoft .NET Framework version 4 or higher installed
on your system. The Microsoft .NET Framework 4 can be found at
http://www.microsoft.com/en-in/download/details.aspx?id=17851 .
Keysight IO
Libraries Suite Ensure that you have IO Libraries Suite 16.3 or higher installed on your
system. The Keysight IO Libraries Suite can be found on the CD that is part of
shipment content or at
http://www.keysight.com/find/iosuite .
VSA for pre-
corrections
filter
calibration If you wish to use the optional pre-corrections filter calibration capability, you
also need Keysight 89601B VSA version 15 or higher installed on your
system. Support till version 18.5 is provided.
M9381A
VSG/CW
Source
Instrument
Drivers Install M9381A VSG Drivers from http://www.keysight.com/find/M9381A
Install M9381A driver version 1.3.300.0 or higher.
M8190A AWG
Driver If you wish to use the M8190A streaming capability, you also need Keysight
M8190A Driver. Install the M8190A driver from
http://www.keysight.com/main/software.jspx?ckey=sw385
Install version 3.0 or higher.
NI-IVI
Compliance
Package The M933xA series AWG require that the NI IVI Compliance Package 4.1 or
greater be installed. To get the latest release of the NI IVI Compliance
Package, go to
http://www.ni.com/drivers/