Keysight M8920A, Getting Started Manual

Page: 92 / 93

Cable and Connector Care
Cleaning Connectors
1. Inspect the connectors for dust, dirt, metal fragment, oils or film, and debris.
2. Blow off any dust with a filtered, clean supply of compressed air.
3. Add a few drops of high-purity isopropyl alcohol to a small cleaning swab (do
not apply alcohol directly to the parts).
4. Gently wipe connecting surfaces with the end of the cleaning swab.
5. Blow dry with compressed air.
6. Inspect and repeat cleaning procedure if necessary.
92 M8920A Getting Started Guide